Thanks
Re: Wifi disconnects internet access 10 to 15 seconds after connecting.
Re: Wifi not working
Hi Paul,
Thanks for your help. I have downloaded and installed the drivers from the link you have provided. It worked for my for the first time and when I restarted the laptop same problem arise again. I reinstalled the drivers and restarted the laptop several times but its not working now. I have attached the photo of current situation of Network drivers.
Do you have any other reliable solution for thus problem?
Thanks
Vishvjeet
Re: Wifi not working
You're very welcome.
From what I can tell from your screenshot, the Realtek wifi adapter has completely disappeared from the device manager, which is not a good thing.
The only suggestion I can offer would be to go to the device manager, at the top of the device manager window, click on the View tab.
Select the Show Hidden Devices option.
Now go back to the network adapters device manager category.
Click to expand that category.
You should now see the Realtek wifi adapter in light shade.
Right click on it, select Uninstall. Check the uninstall driver box, restart the PC, and see if windows installs it normally again.
If it keeps disappearing I would try backing up your files and do a factory reset of the notebook.
If that doesn't resolve the issue, most likely the wifi card has a hardware defect and would need to be replaced.
Re: My HPstream 11-y0XX needs updated to Windows 10 version 1809,I am out of space. Now can't connec
Hi:
The only suggestion I can offer would be to clean install W10 as follows...
Back up any files you need to keep onto a portable hard drive.
If you any software that needs to be reinstalled, make sure you have the installation files and product keys, if applicable.
You can reinstall W10 for free by using the media creation tool at the link below to create a bootable USB W10 installer.
Use another working Windows PC to create the installation media, since you can't connect to the internet right now.
https://www.microsoft.com/en-us/software-download/windows10
When you get to the part of the installation script that asks 'Where do you want to install Windows?' delete every partition on the hard drive, leaving just one partition of unallocated space. Then click Next, and W10 v1903 should install .
After W10 has completed installing, you can install the drivers and available software from your notebook's support page.
https://support.hp.com/us-en/drivers/selfservice/HP-Stream-11-y000-Laptop-PC/12499227
With this method, you will have the maximum amount of drive space available out of that tiny 32 GB drive.
Re: Wifi not working
I have reinstalled the drivers and restarted a few times and it worked this time.
After showing the hidden devices it looks like everything is ok with the drivers. Please check the attached photo. Its working now and it will again stop working when I will restart it next time.
Do you think is it still the issue with network adapter as it works just perfect sometime?
Thanks
My HP Envy 7640 will no longer print from my Chromebook
My HP Envy 7640 printer will no longer print from my Chromebook. It prints from all other computers in the house, as well as iPhone. This happened recently. We cannot figure it out. Through the Chromebook it says that the printer needs intervention, but it does not. And, if we go into the HP Smart app it says the printer is ready. So frustrating. Have spent hours and getting nowhere. Can anyone help? I am on Windows 10 pro it says.
Re: Wifi not working
Hi:
Yes, it looks fine now according to your screenshot.
Uninstall all of those light shaded devices you see listed there.
You don't need them.
They are getting created every time the wifi adapter shows up.
If it happens again, the only way you are going to be able to confirm the wifi adapter is bad would be to factory reset the notebook, or clean install W10 and see if the problem reoccurs.
There really is no way to software test a wifi card to see if it is defective or not.
Or if you just want to go ahead and replace the wifi adapter now, then you may as well upgrade it.
I recommend this model since your notebook only has one antenna cable attached to the wifi adapter.
Realtek RTL8821CE 802.11 ac 1x1 Wi-Fi + Bluetooth 4.2 Combo Adapter (MU-MIMO supported)
HP Part # L17365-005
The card has been on back order from HP for eons now, but you can find one for sale on eBay.
https://www.ebay.com/sch/i.html?_from=R40&_nkw=L17365-005++&_sacat=0&_sop=15
Here is the link to your notebook's service manual where you can find the wifi adapter R & R procedure....
Change of router on printer
Problem is the change of router with the satellite router. The printer (hp 8600} and computer using the main router is now on the network and working fine. The laptop and printer using the satellite is the problem. Laptop okay but I am unable to connect the printer (hp 8100) to the network. Can you help, please.
Re: HP Omen Command Center does not detect WIFI and random Lag Spikes
Thank you for posting on the HP Support Community.
Don't worry as I'll be glad to help, I have a few troubleshooting steps we could try to fix the issue:
Firstly, perform Windows Update and HP Support Assistant: ( do not skip any troubleshooting steps if you feel steps are repeating )
To check for updates now, select the Start button, and then go to Settings > Update & security > Windows Update, and select Check for updates.
Install updates from HP Support Assistant: Go to Download HP Support Assistant to install the tool.
- To open HP Support Assistant, double-click the HP Support Assistant icon
.
- Click My devices in the top menu, and then click Updates in the My PC or My notebook pane.
- Click Check for updates and messages to scan for new updates.
- Review the list of updates. Updates with a yellow information icon are recommended. Updates with a blue information icon are optional.
- Click the update name for a description, version number, and file size.
- Select the box next to any updates you want to install, and then click Download and install.
And, also run BIOS Update:Follow steps from the link: https://support.hp.com/in-en/document/c00042629
Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Intel Wireless-AC 9560 not working
I recently bought my HP Envy 13 aq002na laptop, I updated Windows and the BIOS yesterday and that’s when the problem started. The Intel Wireless AC 9650 network adapter doesn’t work and I cannot connect to any networks. It’s throws out “The device cannot start. (Code 10) {Operation Failed} The requested operation was unsuccessful.” I have tried everything that was suggested on the internet and still no luck
Re: Change of router on printer
Please treat use the following instructions to fix:
http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html
Please also note: Your printer may only support 2.4GHz therefore you need to check and allow your router to broadcast both (dual) bands which are 2.4GHz and 5.0GHz.
Regards.
constant resetting of the wi fi adapter required
For sometime now my internet has been disconnecting, often 2 to 3 times in an hour. To reconnect, I right click on the wireless icon at the bottom right of the screen (task bar) and select the " Troubleshoot Problems". After this feature completes, the troubleshooter resets the Wi-Fi ADAPTER and this has me up and running again. This is driving me crazy. I have updated the drivers...I have backdated the drivers... I have followed some suggestions via the internet...but nothing helps!
Re: Screen sharing with miracast stopped working on my laptop
Thank you for posting on the HP Support Community.
Firstly. let's try performing a system restore and check: System Restore returns your computer to the files and settings from the restore point. Your personal files and documents are not affected. Click here: https://support.hp.com/in-en/document/c03327545 to perform System Restore (Windows 10, 😎
Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Re: constant resetting of the wi fi adapter required
Hi:
What model wifi adapter does your notebook have?
Re: HP Notebook volume control slider will turn audio on but will not increase or lower volume.
Thank you for the instructions. The laptop is fairly new so a reinstall shouldn't be too painful.
Re: constant resetting of the wi fi adapter required
Intell Dual Band Wireless ac7265.
HP Pavilion 15 - Wifi shows limited access no internet
Help! Wifi shows limited access no internet. I have trying to fix this from past 10 days with no results
In Device Manager there are no errors indicated with the device or its drivers.
Wifi adapter - Ralink 802.11 b/g/n WiFi Adapter
With lots of research on net and forums i tried below options but still it did not fix issue.
Reinstalled OS
Reinstalled wifi driver
Updated wifi driver
Disabling the Power Off option for the adapters
Resetting the TCP/IP settings
Resetting the Winsock catalogue
Checked router settings and wifi works in other laptops
Checked with different wifi still same issue
Please help to provide some insights on how to fix this.
Re: HP WLAN circuit not seen by MS Windows 10
What I can see is a Bluetooth
Bluetooth Network Conn... Bluetooth Device (Personal Area Netw... 14 Disconnected 60-57-18-70-6C-D6 3 Mbps
Which suggests an adapter is present, Intel of Malaysia. These being the most likely...
- Intel Dual Band Wireless-AC 7265 802.11a/b/g/n (2x2) Wi-Fi + Bluetooth 4.0 Combo Adapter
- Intel Dual Band Wireless-AC 3160 802.11ac (1x1) Wi-Fi + Bluetooth 4.0 Combo Adapter
With...Intel WLAN Driver 21.10.0.5 Rev.L 211.5 MB May 23, 2019 Download being the most likely.
The WLANSVC service provides the logic required to configure, discover, connect to and disconnect from a wireless local area network (WLAN) as defined by IEEE 802.11 standards. It also contains the logic to turn your computer into a software access point so that other devices or computers can connect to your computer wirelessly using a WLAN adapter that can support this. Stopping or disabling the WLANSVC service will make all WLAN adapters on your computer inaccessible from the Windows networking UI. It is strongly recommended that you have the WLANSVC service running if your computer has a WLAN adapter.
So WINKEY + R and type services.msc and investigate.
It is looking like a failed piece of hardware.
Caveat Emptor.
Re: HP Pavilion 15 - Wifi shows limited access no internet
Hi
First:- Turn off the computer, press and hold the PWR button for 4 seconds.
Then - Leave only keyboard and mouse connected, disconnect all externally connected
devices such as Docking Station, USB storage devices, displays, and printers.
Unplug the AC adapter from the computer.
Next - Press and Hold the Power button for 15 seconds to Hard Reset.
Rinse and Repeat
NOW begin checking/testing/proving the Hardware is fit for purpose.
Power on your PC, press ESC (repeatedly), then F2 at the prompt.
Choose System Tests (Fast Test does a 4 minute hardware check).
AND/OR
HOW DO I USE DIAGNOSTICS?
HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The tool runs within the Windows operating system in order to diagnose hardware failures. HP PC Hardware Diagnostics Windows comes pre-installed on new HP computers, but if not on yours, download here:- http://ftp.hp.com/pub/softpaq/sp93001-93500/sp93457.exe
Copy and use the individual command lines as needed.
Preferably run as an Administrator.
Post anything non-personal, but relevant please.
Re: Screen sharing with miracast stopped working on my laptop
I tried the system restore with no success. Also the options I had were not so back in the past. I have this problem for almost a month now and the system restore was for 2 weeks before...